Material Dispensing Systems

RAPAC and many of their converters will design and install the material handling system that meets your needs.

 

PULL-UP BAGS

Ideal for the small "peanut" user. This system is inexpensive and easy to use. You may contact your local loose-fill supplier for more information.
BULK HOPPER SYSTEMS

Designed to provide a low cost means of feeding loose-fill to the packing station. Must have high clearance to provide adequate storage. Material is typically delivered in bulk trucks and blown into the storage hoppers. Under the bags, you may have a limited number of "drops" to the packing station.
CONTINUOUS FLOW SYSTEMS

Designed for the large loose-fill users who have requirements for multiple "drops" (2 to 45) or where there are low clearance restrictions. This system provides for a continuous flow of "peanuts" to the packing station.

To request assistance from a Rapac Engineer in designing a Material Handling System to meet your needs, click here.

This site, all images, copies, and products are Copyright© 2000, Ring Corporation and RAPAC Inc. All rights reserved. Any duplication or reuse without prior, express written permission is strictly prohibited. If you have any questions, comments, or concerns about this site, please contact our Webmaster.